setting up
_11
01 SETTING
UP
1.
Locate the height-adjuster (
1
) in the freezer
drawer.
Unscrew the four Phillips screws (
2
) slightly to
loosen the door.
1
2
2.
Loosen the controller screw (
3
) with a Phillips
screwdriver.
3
3.
Find the best level to align the door slope.
Example)
The slope is about 2mm (0.08inch) as shown below.
Example)
The slope is about 2mm (0.08inch) as shown below.
-
Rotate the Height Adjuster to -2.0 to reduce the door slope.
-
Rotate the Height Adjuster to -2.0 to reduce the door slope.
Slope
Slope
Reference
Reference
plane
plane
After adjustment, fi rst tighten screw (
3
) and
then screw (
2
) .
CHECKING THE WATER LINE
A water dispenser is one of the helpful features on
your new Samsung Refrigerator. To help promote
better health, the Samsung water fi lter removes
unwanted particles from your water.
MAKING MINOR ADJUSTMENTS
BETWEEN DOORS
Remember a level Refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on leveling the
Refrigerator.
Fixed
Fixed
Part
Part
Adjustment
Adjustment
part
part
1.
If you open the drawer (
1
), you can see the
lower hinge (
2
) .
2.
Insert a philips screwdriver (+) (
3
) into the shaft
(
4
) of the lower hinge.
3.
Adjust the height by turning a philips screwdriver
(+) (
3
) clockwise (
DOWN
DOWN
) or counterclockwise
(
UP
UP
).
3
3
4
1
2
When you turn a philips screwdriver (+)
counterclockwise (
), the door will
move up.
ADJUSTING THE FREEZER
DRAWER LEVEL
Freezer Drawer
Freezer Drawer
Adjustment part
Adjustment part
DA99-03404D-11.indb 11
DA99-03404D-11.indb 11
2015. 5. 7.
8:10
2015. 5. 7.
8:10
