Samsung DCB-9401R, Instructions For Use Manual

GB-8

D

I

G

I

T

A

L

C

A

B

L

E

R

E

C

E

I

V

E

R

GB-9

DCB-9401R

GB

DCB-9401R

10. ALT(YELLOW)

This key is for selecting the soundtrack list for the current service.
This key functions same as the YELLOW key on the menu.
Press it once and sound track appears.
Press it twice and video track appears.
The sound and video track services are not provided for every channel 
and depend on the conditions the operator is in. 
This key is for displaying the help message in the sub-menu.

11. AUDIO(BLUE)

This key is for changing the Audio to the left, right or both channels,
This key functions same as the BLUE key on the menu.

12. 

i

(INFORMATION)

This key is for displaying the program information box in the screen.

(RED)

This key functions same as the RED key on the menu.
Press it once and you can get simple information on the program.
Press it twice and you can get detailed information on the channel in
text box.

13. MENU

This key is for opening up the menu or returning to the previous menu.

14. EXIT

This key is for exiting a menu or returning to the previous menu or exiting
some banners.

15. OK

This key is for entering and confirming any data to the receiver in the 
menu system. This key is for selecting the item. Press while viewing 
TV and a list of channels is displayed.

16. 

/ 

/ 

/ 

These keys are for moving the highlight bar for selecting options on the 
menu. 
These keys are for changing channels (

/ 

).

17. CH

/CH

These keys are for changing channels.

18. VOL+/VOL-

These keys are for increasing or decreasing the volume.

19. TIMER 

This key is for reserving events(programs) into timer(s) in EPG. 
If a event is set in timer, it will be turned on/off automatically based on 
start/end time of event. This key activates/deactivates timer(s) in EPG 
as toggle type. After activating EPG screen by pressing ‘EPG’ key, you 
can select the interesting event (program) using the 

/ 

keys and 

/ 

keys. Then, press ‘TIMER’ key. If this event is reserved in the timer,

® is displayed on the right corner of this event name. ‘EPG’ on ‘event 
Repetition’ in ‘Time & Timer Settings’ menu is displayed, too. 
However, if there is no event on EPG for the channel, this TIMER key 
can not be supported.

Remote Control Unit

N

No

otte

e

: When inserting batteries, 

make sure that the po/-) is correct.

1. POWER

This is for switching the receiver 
ON/STANDBY mode.

2. 0-9 NUMERICAL keys

These keys are to enter numeric values 
and to select the channel directly by 
entering its number.

3.  PG+/PG-   

These keys are for moving up or down 
pages on the menu and TV/Radio list.

4. TV/RADIO 

This key is for toggling between the TV 
channel and Radio channel.

5. MUTE

This key is for toggling between 
normal & muted audio.

6. FAV

Use the key to switch between favorite lists.

7.  EPG(Electronic Program Guide)

EPG key displays the TV/Radio Program 
guide.

8. LAST

This key is for calling up directly whatever
channel you were watching from the list.

9. TEXT(GREEN)

This key is for selecting the subtitle and 
Teletext mode. This key functions same as 
the GREEN key on the menu. Press it once 
and Teletext OSD banner appears. 
You can select the language you want using 
up/down keys. Teletext will be displayed on 
TV Screen without operating anything on TV. 
This Teletext can be displayed on TV which 
doesn’t support Teletext functionality. 
Press it twice. Then Teletext will be available 
on TV. It means that Teletext can be chosen 
by TV with TV RCU. Press it three times and 
subtitle banner will be shown. You can select 
the language you want using up/down keys.

DESCRIPTION

DESCRIPTION

MF68-00340A_GB_1105  11/5/04  11:38 AM  Page 8