Samsung DCB-9401R, Instructions For Use Manual

GB-21

DCB-9401R

GB

GB-20

D

I

G

I

T

A

L

C

A

B

L

E

R

E

C

E

I

V

E

R

DCB-9401R

4.2 OSD Settings

You can set the OSD transparency, the display time,
Color Scheme and OSD Position.

● 

Select OSD Transparency level.
The OSD Transparency level from 0 to 100%.
Setting is made with the numeric keys, 

/ 

keys or 

PG+/PG-

keys.

/ 

keys      : Setting in increment of 1%.

PG+/PG-

keys : Setting in increment of 10%. 

N

No

otte

e  

:

Transparency is applied to all color schemes.

● 

Set the display duration of the information(banner) box 
displayed in the screen.

The time ranges from 0.5 to 60.0 seconds.

Setting is made with the numeric keys, 

/ 

keys or 

PG+/PG-

keys.

/ 

keys      : Adjusting in increment of 0.5sec.

PG+/PG-

keys : Adjusting in increment of 1 sec.  

● 

Set the Color Scheme : 

You can change color according to your preference. 
(i.e background, text, symbol, line, etc)

/ 

keys : 

select the color scheme mode. 

Color scheme 1 : changes the menu to sky blue color. 

Color scheme 2 : changes the menu to green color. 

Color scheme 3 : changes the menu to dark brown color. 

User defined :

Sets the color according to user preference.

EPG colors :

Sets the color in the EPG menu.

N

No

otte

e  

:

Color scheme 1, 2 and 3 may be changed in the future  

by upgrading software.

OPERATING THE  RECEIVER

3. Change PIN Code

To change the PIN Code, select the second option “

Change 

PIN Code

”. 

This will take you to the following menu:

In this option, you need to enter the current PIN Code at 
the first cursor, and at the second cursor enter the desired 
PIN Code. 
To confirm, you need to enter the new PIN Code again.

Please remember the PIN Code should be a 4 digit numerical value.

THE FACTORY PRESET PIN Code : 

0 0 0 0

.

4. System Setup

This option enables you to change the factory preset 
system settings as per your requirements.

4.1 Language Selection

The “

Language Selection

” option allows the user to select 

the desired language of the OSD, Soundtrack, Teletext, Subtitle 
or EPG. However, these languages for Soundtrack, Teletext,
Subtitle and EPG depend on broadcasting.
For example, even the language for Subtitle can be selected, 
it may not be supported because of no Subtitle on the program.

●

To accommodate user there are 2 OSD languages available 
and 37 languages supported for soundtracks, subtitles and 
EPG. 

● 

To select the desired language menu, press 

/ 

keys to 

change language and press 

OK

.

● 

The Soundtrack, Teletext, Subtitle will vary according to the 
selected language.

OPERATING THE  RECEIVER

MF68-00340A_GB_1105  11/5/04  11:38 AM  Page 20