DCB-B263Z
GB-16
DCB-B263Z
GB-17
D
I
G
I
T
A
L
C
A
B
L
E
R
E
C
E
I
V
E
R
GB
OPERATING THE RECEIVER
Get started for the first time
Before you can view the television or radio program, you must
perform the installation procedure first.
Therefore you will see only “Installation” at first when you plug in
your system.
The Easy Installation gives you the convenience of selecting
language.
The menu will be displayed with the language you have selected.
●
Select the language by pressing the
/
key.
The selected language will be applied on whole menu.
●
When you are satisfied with the settings, select confirmation
by pressing
/
keys, then press the
OK
key. The message
“Installation procedure in progress. Please wait…” will be
displayed on the screen.
Main Menu
After installing your cable system and STB with appropriate
connectors.
●
Plug in the AC main power and switch on the receiver.
●
Press the
MENU
key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed from 1 to 5.
For the sub-menus 1, 2 and 3 you need the PIN Code.
8. Teletext OSD
When the current broadcasting program provides Teletext OSD,
press the
GREEN (TEXT)
key twice to see the current
Teletext OSD list.
To change the Teletext OSD:
●
Use the
/
keys to select a
Teletext OSD
you want.
●
Press the
OK
key and then the
Teletext OSD
you want is
displayed on the screen.
9. Teletext VBI
A television with TV functions supported shall be used.
The system shall operate with the subtitle turned off.
10. Audio Mode
You can choose a mode among left, right or stereo using the
BLUE (AUDIO)
key.
To change the audio mode:
●
Press the
BLUE (AUDIO)
key to select the left, right or stereo.
●
Press the
EXIT
key to save and escape from this menu.
BASIC FUNCTIONS
MF68-00411A_GB 1/23/07 7:38 PM Page 16
