![background image](http://html.mh-extra.com/html/samsung/dcs/dcs_programming-manual_340862080.webp)
SAMSUNG
MMC PROGRAMS
COMBINED SYSTEMS PROGRAMMING MANUAL
FEBRUARY 2004
MMC 205 (Page 1 of 1)
MMC: 205
ASSIGN LOUD BELL
FOR: DCS CII 816 408i
408
i
DCS100
i
DCS500
O
S500
Purpose:
Designates the station that controls the loud bell ring output. This output de-
pends on your system, as follows.
DCS
Trunk A card. Each Trunk A card has one loud bell output; these
outputs are given a Directory Number of 3901–3920 as a default
value to enable them to be assigned.
Compact II
Misc card (assigned in
MMC 219, Common Relay Service Type
816 and 408/408i
MMC 219, Common Relay Service Type
i
DCS500
Misc card. Each Misc card has one loud bell output; these outputs
are given a Directory Number of 390x as a default value to enable
them to be assigned.
i
DCS100
Misc card (assigned in
MMC 219, Common Relay Service Type)
OS500
Misc card. Each Misc card has one loud bell output; these outputs
are given a Directory Number of
3995 (‘L’) or 2995 (‘S’ & ‘M’) as a
default value to enable them to be assigned.
The loud bell will follow the ring cadence of the designated station. Only a station can be
assigned to control the loud bell; a station group cannot be assigned.
ACTION DISPLAY
1. Open programming and select
205
Display shows current setting
[361] LOUD BELL
RING PAIR : NONE
2. Dial loud bell number (e.g., 362)
OR
Press VOLUME keys to scroll through loud bell
numbers and press RIGHT soft key to move the
cursor
[362] LOUD BELL
RING PAIR : NONE
3. Enter station number (e.g., 201)
OR
Press VOLUME keys to make selection and
press RIGHT soft key to return to step 2
[362] LOUD BELL
RING PAIR :201
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
NONE (Unassigned)
Related Items:
MMC 219 Common Relay Service Type