Page 2
If you have entered invalid data, you will receive an [INVALID ENTRY] message for three
seconds. Re-enter the correct date and time. If the information you entered is incorrect, repeat the
procedure.
3.3
RESET STATION PASSCODES TO DEFAULT
Individual keyset users can set or change their own individual passcodes. These passcodes are used to
lock and unlock keysets, override toll restriction and access the DISA feature. At times, it may be
necessary for the System Administrator to reset a station's passcode to default "1234." This program
cannot be used to display passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN
- Select the extension number.
HOLD
- Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1 Press
TRSF 101
Display shows
[201] PASSCODE
PASSCODE : * * * *
2. Dial the station (eg. : 205) OR use the
UP
and
DOWN
keys to scroll through
[205] PASSCODE
PASSCODE : * * * *
the keyset numbers and press the RIGHT
soft key to move the cursor to the right
3. Press
HOLD
to reset passcode
[205] PASSCODE
PASSCODE : 1234
4. Press the RIGHT soft key to return to
step 2 OR press
TRSF
to store and exit
programming OR press
SPEAKER
to
store and advance to the next program