SAMSUNG
MMC PROGRAMS
COMBINED SYSTEMS PROGRAMMING MANUAL
FEBRUARY 2004
MMC 513 (Page 1 of 1)
MMC: 513
HOTEL TIMERS
FOR: DCS CII
i
DCS100
i
DCS500
OS500
Hotel application only
Purpose:
Sets the normal check-out and clean times for guest rooms. Also allows
i
DCS and
OS500 system users to set a check-in end time (see descriptions, below). These are sys-
tem-wide timers that affect all rooms and are set in 24-hour clock format (e.g. 1430 is
2.30PM).
CHECK OUT TIME
If a room is occupied after the checkout time, an additional day’s room charge will be auto-
matically added to the room bill. If a room is flagged as ‘occupied’ but ‘on hold’ then the addi-
tional day’s room charge will not be added.
A late check-out can be performed by setting a room status to ‘Hold’.
ROOM CLEAN TIME
This is the time each day that the system will flag all occupied rooms as ‘Needs Cleaning’.
CHECK IN END TIME
(
i
DCS and OS500 systems only)
The time entered here tells the system which rooms to automatically add an additional day’s
charge at the Check Out Time. For example, if you set the Check In End time as 5 a.m., all
rooms checked in
before
5 a.m. will be automatically charged an extra day at the Check Out
Time (which might be, say, 11 a.m.). Rooms checked in
after
5 a.m. will not be charged ex-
tra until the next day, if still occupied at the Check Out Time.
ACTION
DISPLAY
1. Open programming and select
513
Display shows
CHECK OUT TIME
HH:MM : _ :
2. Select the timer using the VOLUME keys (e.g.
ROOM CLEAN TIME) and press RIGHT soft key
ROOM CLEAN TIME
HH:MM : _:
3. Enter timer value (e.g. 11am)
ROOM CLEAN TIME
HH:MM : 11:00
4. Verify time (and re-enter if necessary)
Press RIGHT soft key to return to step 2
ASSIGN HOLIDAY
01:1225
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
None
Related Items: None