background image

setting up your dishwasher

 

_9

CyCle 

SeleCTOR

You can select the appropriate wash cycle depending on the soil level of your 
dishes. When you select a cycle, the indicator for that cycle lights up. If you 
want to cancel the selected cycle, press the selected cycle button again.
If an error occurs during an operation, an error message is illuminated with a 
warning sound. Refer to the information codes page.

CANCel & 

dRAIN

To cancel & drain a cycle currently running, hold down both the 

heavy

 and 

delicate

 buttons for three (3) seconds.

pOWeR

When pressed, all indicator lights turn on and off and the most recently 
finished cycle light lights up.
When the dishwasher is running and a selected cycle is finished, the

 

Clean

” 

light is illuminated for 10 minutes.  The Power turns off automatically.

START & pAUSe

In Power on condition, close the dishwasher door and select the cycle and 
desired options. Press the 

Start/pause

 button to begin the cycle.

When you want to pause the dishwasher while running, press the 

Start/

pause

 button and make sure to open the door slowly and carefully.

01 setting up your dishwasher

4

2

3

5

4

7

1

6

5

6

7

DMT300-00062A .indb   9

2010-03-26   �� 1:57:34

Summary of Contents for DMR78AHB































Reviews: