3-12
3. Disassembly and Reassembly
n
o
i
t
p
i
r
c
s
e
D
o
t
o
h
P
t
r
a
P
AIR BREAK ASS’Y
DRAIN HOSE
&
ELECTRICAL
SAFETY HOSE
17. Air Break ass'y
Separate housing L
Separate air break cap turn to anti
clock wise
1) Separate the AIR BREAK ASS’Y connector.
Separate top table ass’y
Caution
Take care when holding and removing the clamp
with a tool, as it may bounce and harm you.
2) Remove the four (4) clamps and hose.
18.Drain hose
Separate housing
Separate air break ass'y
1) Remove DRAIN HOSE HOLDER using a screw
driver.
2) Remove DRAIN HOSE for back of product.
Separate top table ass’y
Be careful to avoid breaking them, because they
are connected with a hook.
3) Remove the two (2) DRAIN HOSE connectors using
a screw driver.
4) Remove the two (2) screws holding the INLET VALVE
COVER.
5) You can remove the ELECTRICAL
for back of product.
(STANDARD HOSE)
* STANDARD HOSE
1) Remove DRAIN HOSE by rotating it counterclock wise.
2) Remove two(2) screws holding the INLET VALVE
and connector..
3) Remove the clamp holding the INLET HOSE.
4) Remove the clamp holding the INLET HOSE.
All manuals and user guides at all-guides.com