1-2
1. Safety Instructions
While Servicing
&KHFNLIWKHSRZHUFDEOHLVGDPDJHGÀDWWHQHGFXWRURWKHUZLVHGHJUDGHG
If faulty, replace it immediately.
)DLOLQJWRGRVRPD\UHVXOWLQHOHFWULFVKRFNRU¿UH
ࣃ
¯
Completely remove any dust or foreign material from the housing, wiring and connection
parts.
7KLVZLOOSUHYHQWDULVNRI¿UHGXHWRWUDFNLQJDQGVKRUWVLQDGYDQFH
ࣃ
¯
When connecting wires, make sure to connect them using the relevant connectors and
check that they are completely connected.
,IWDSHLVXVHGLQVWHDGRIWKHFRQQHFWRUVLWPD\FDXVH¿UHGXHWRWUDFNLQJ
ࣃ
¯
Make sure to discharge the PBA power terminals before starting the service.
Failing to do so may result in a high voltage electric shock.
ࣃ
¯
When replacing the heater, make sure to fasten the holder heater after ensuring that it is
inserted into the bracket-heater.
If not inserted into the bracket-heater, it touches the tub and causes noise and
electric leakage.
ࣃ
¯
After Servicing
Check for any water leakage.
Perform a test run for the dishwasher using the standard(normal) cycle and check
ZKHWKHUWKHUHLVDQ\ZDWHUOHDNDJHWKURXJKWKHÀRRUVHFWLRQRUWKHSLSHV
ࣃ
¯
Do not allow consumers to repair or service any part of the dishwasher themselves.
This may result in personal injury and shorten the product lifetime.
ࣃ
¯
If it seems that grounding is needed due to water or moisture, make sure to run
grounding wires.
(Check the grounding of the power outlet, and additionally ground it to a metallic water
pipe.)
Failing to do so may result in electric shock due to electric leakage.
[Running a grounding wire]
- Twist a grounding wire (copper wire) two or three times around the tap.
- If you connect the grounding wire to a copperplate, bury it 75 cm under the earth in a
place with a lot of moisture.
Ä
Do not connect the grounding wire to a gas pipe, plastic water pipe or telephone
ZLUH7KHUHLVDULVNRIHOHFWULFVKRFNRUH[SORVLRQ
ࣃ
¯
All manuals and user guides at all-guides.com
