28_
troubleshooting
troubleshooting
ChECk ThEsE PoInTs If your DIshWAshEr…
pROblem
pOSSIble CAUSe
SOlUTION
Will not start.
The door is not closed completely.
The
start/reset
button is not
selected.
Check that the door is latched and
closed completely.
Press the
start/reset
button before
closing the door.
No program is selected.
Select a program.
The power cord is not connected.
Connect the power cord.
The water supply does not work.
Check that the water supply valve is
open.
has a bad odor.
There is water left over from the last
cycle.
Insert detergent without loading
dishes, and run the Normal cycle to
clean the dishwasher.
has water remaining
after the program has
finished.
The drain hose is folded or clogged.
Straighten the hose.
has food particles
remaining on dishes.
An inappropriate program has been
selected.
Select a program according to the
number and soil level of the dishes,
as directed in this manual.
The filter is contaminated.
Clean the filter.
No dishwashing detergent is being
used.
Use a automatic dishwasher
detergent.
The pressure of the supplied water
is low.
The proper pressure of the supplied
water should be 0.05 ~ 0.8 Mpa.
One of the nozzles is clogged.
Clean the nozzle.
The dishes are improperly loaded.
Rearrange the dishes so they do not
interfere with the spray arm and the
dispenser operation.
Does not dry dishes well.
There is no rinse aid in the dispenser. Check the dispenser and add rinse
aid.
UserManual-DMS400TH_EN.indd 28
2010-06-01 7:07:24