background image

DSR 3800, DSR 3700

12

D

I

G

I

T

A

L

 

S

A

T

E

L

L

I

T

E

 

R

E

C

E

I

V

E

R

DSR 3800, DSR 3700

13

3. Select Soundtrack

● 

Press 

Yellow (

)

key to see 

the soundtrack list.

●  

Press

/

and

key to select one.

4. Select Videotrack

● 

Press 

Yellow (

)

key twice to see 

the videotrack list.

●  

Press

/

and

key to select one.

5. Service List

●  

Press 

key to while you are viewing a program.

●  

Select list by pressing 

TV/RADIO

or 

FAV

key.

The icon       behind the channel name symbolises
scrambled channel, and the        icon behind the
channel name symbolises lock channel.

●  

Select the channel by pressing 

/

,

/

.

●  

Press 

key to watch that channel.

The colour key corresponds the following service list.

●  

Green (

)

key - 

Favorites

●  

Yellow (

)

key - 

Alphabetical

● 

Blue

(

)

key - 

Provider

●  

Red

(

)

key - 

Transponder

BASIC FUNCTION

BASIC FUNCTIONS

1. Display Screen

Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following 
picture(banner) each time you switch channels:

●  

Press the 

Red (

)

key in view mode.

●  

Select the channel by pressing 

Numerical (

~

)

keys or

/

keys and select 

TV/RADIO

key to move to TV or 

Radio channel. 

You will also see this picture each time you change channels.

When you press 

TV/RADIO

key on the Remote Control Unit, 

TV

and 

Radio

program are toggled.

Detailed program information

●  

Press the 

Red (

)

key twice while you are viewing a program.

First you will see the banner described above. 
After pressing the 

Red (

)

key a second time you will receive detailed 

program information.

N

No

otte

e  

:

This service depends on service provider. 

2. Volume Control

To control the volume level :

● 

Press  /

keys to adjust the volume level. 

●  

Press 

MUTE 

key to turn to silence mode. 

● 

Press 

MUTE 

key again in order to cancel the mute function.

Left Audio Status

Program Information

Current Favorite

The number of soundtrack in current channel

Signal Status

Parental Lock

Channel Number

Channel Name

Right Audio Status

CAS Name

DSR3800_3700_6.28  7/8/02  11:59 AM  Page 12

Summary of Contents for DSB-3800




















Reviews: