DTB-9401F
GB-16
DTB-9401F
GB-17
D
I
G
I
T
A
L
T
E
R
R
E
S
T
R
I
A
L
R
E
C
E
I
V
E
R
GB
OPERATING THE RECEIVER
Main Menu
After installing your antenna system and DTB-9401F with appropriate connectors.
●
Plug in the AC main power and switch on the receiver.
●
Press the
MENU
key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed from 1 to 4.
For the sub-menus 1, 2 and 3 you need the PIN Code.
1. Installation
This menu consists of 3 sub-menus:
Manual Scanning, Auto Scanning and Reset to Factory Default.
●
Select “
Installation
” in the main menu mode to
select the sub menu.
●
Enter the
PIN
Code.
If you have not entered your own
PIN
Code then the
PIN
Code
0000
applies, which was set at the factory.
8. Teletext OSD
When the current broadcasting program provides Teletext OSD,
press the
TEXT
key twice to see the current Teletext OSD list.
To change the Teletext OSD:
●
Use the
/
keys to select a
Teletext OSD
you want.
●
Press the
OK
key and then the
Teletext OSD
you want is
displayed on the screen.
9. Teletext VBI
When the current broadcasting program provides
Teletext VBI
, press the
TEXT
key three times to see the
current Teletext VBI list.
To change the Teletext VBI:
●
Use the
/
keys to select a
Teletext VBI
you want.
●
Press the
OK
key and then the
Teletext VBI
you want is
displayed on the screen.
N
No
otte
e
:
A television with TV functions supported shall be used.
The system shall operate with the subtitle turned off.
10. Audio Mode
You can choose a mode among left, right or stereo using the
AUDIO
key.
To change the audio mode:
●
Press the
AUDIO
key to select the left, right or stereo.
●
Press the
EXIT
key to save and escape from this menu.
BASIC FUNCTIONS
MF68-00321A_GB 5/25/05 1:26 PM Page 16
