DTB-H550F
ENG-31
ENG
DTB-H550F
ENG-30
D
I
G
I
T
A
L
T
E
R
R
E
S
T
R
I
A
L
H
D
T
V
R
E
C
E
I
V
E
R
OPERATING THE RECEIVER
OPERATING THE RECEIVER
2.3 Channel Manual Scan
To tune-in new channels and weak signals, the STB has
been provided with the option “Channel Manual Scan”
where the frequency channel can be entered by the user.
●
Select “Channel Manual Scan” in Channel menu.
●
Select the channel number of frequency you want to
find by pressing the
/
keys.
●
Press the
SELECT
(
) key to start the scanning
process.
N
No
otte
e
:
1. When the frequency channel that you have
entered has the corresponding available channel
data, the number of channels is displayed at the
bottom of the screen and the tuner is marked
“LOCKED”.
2. When the frequency channel that you have entered has no corresponding available
channel data, the number of channels is not displayed at the bottom of the screen and
the tuner is marked “UNLOCKED”. Therefore ensure that a valid one has been entered.
●
When channel scanning is done, the number of scanned channels is displayed at the bottom
of the screen.
●
Press the
RETURN
(
) key to save your work and go back to the previous menu.
●
Press Exit to exit the menu list.
2.4 Channel Delete
You can delete channel searched.
●
Select “Channel Delete” in the Channel menu.
●
Select the channel you want to delete using the
/
,
YELLOW (Page Up)
, or
BLUE (Page Down)
key.
●
Press the
RED
key to delete the selected channel
from the channel list.
Press the
GREEN
key to delete all channels.
●
A selected channel is marked with a Recycle Bin (see
figure).
●
Press the
SELECT
(
) key for confirmation.
●
Press the
RETURN
(
) key to cancel your work or go
back to the previous menu.
●
Press Exit to exit the menu.
2.5 Channel Block
You can set lock for any desired channel.
●
Select “Channel Block” in the Channel menu.
●
Select the channel you want to delete using the
/
,
YELLOW (Page Up)
, or
BLUE (Page Down)
key.
●
Press the
RED
key to lock the selected channel from
the channel list.
●
A selected channel is marked by the Lock symbol (see
figure).
●
Press the
SELECT
(
) key for confirmation.
●
Press the
RETURN
(
) key to cancel your work or go
back to the previous menu.
●
Press Exit to exit the menu.
N
No
otte
e
:
This will lock the channel. Whenever you need
to view the channel, you will have to enter the
PIN Code at the request window.
0401 DTB-H550F_ENG 4/1/05 3:18 PM Page 30
