DTB-H550F
ENG-17
ENG
DTB-H550F
ENG-16
D
I
G
I
T
A
L
T
E
R
R
E
S
T
R
I
A
L
H
D
T
V
R
E
C
E
I
V
E
R
1.
Connect an antenna cable to the ANT.IN jack
on the Set-Top Box.
2.
Connect the Video Cables.
YP
B
P
R
format:
Connect a Component video cable between
the COMPONENT OUT (COMPONENT) jacks on
the Set-Top Box and the DTV INPUT jacks on
the TV.
RGB format:
Connect an RGB video monitor cable between
the RGB OUT (RGB) jack on the Set-Top Box
and the RGB VIDEO IN jack on the TV.
3.
Connect the Audio Cables.
Connect an audio cable between the L/R
AUDIO OUT jacks on the Set-Top Box and the
L/R AUDIO IN jacks on the TV.
N
No
otte
e
: You must set the YP
B
P
R
or RGB (DTV
OUTPUT) switch on the rear of
Set-Top Box to YP
B
P
R
or RGB.
You then must set the corresponding
input you are using on the TV.
Connecting the Set-Top Box to a TV Set
CONNECTING YOUR STB
CONNECTING YOUR STB
Digital TV or Normal TV
1.
Connect an antenna cable to the ANT.IN
jack on the Set-Top Box.
2.
Connect the Video Cables.
Digital TV:
Connect a component video cable between
the RGB OUT or COMPONENT (YP
B
P
R
) jacks
on the Set-Top Box and the DTV INPUT jacks
on the TV.
Normal TV:
Connect a video cable between the VIDEO
OUT jack on the Set-Top Box and the VIDEO
INPUT jack on the TV.
Or, connect an S-Video cable between the
S-VIDEO OUTPUT jack on the Set-Top Box
and the S-VIDEO INPUT jack on the TV.
3.
Connect the Audio Cables.
Digital TV:
Connect an audio cable between the
DIGITAL Audio OUT (optical or coaxial) jack
on the Set-Top Box and the Digital Audio IN
jack on the TV.
Or, connect an audio cable between the
L/R AUDIO OUT jacks on the Set-Top Box
and the L/R AUDIO IN jacks on the TV.
Normal TV:
Connect an audio cable between the L/R
AUDIO OUT jacks on the Set-Top Box and the
L/R AUDIO IN jacks on the TV.
N
No
otte
e
: 1. The TV set must be “digital
compatible” (i.e., it must have
appropriate audio and digital video
terminals).
2. If 1080i, 720p, or 576p is selected with the RESOLUTION switch on the
Set-Top Box, the On-Screen Display menus will not be supported for
VIDEO OUT (composite) and S-VIDEO OUT.
The OSD menus for VIDEO OUT and S-VIDEO OUT are supported only when
576i is selected.
3. You must set “DTV OUTPUT (YP
B
P
R
/RGB)” to YP
B
P
R
to enable the Component
Video output.
<Digital TV>
< Normal TV>
0401 DTB-H550F_ENG 4/1/05 3:18 PM Page 16
