English
19
Installation
Levelling
Before you install the dryer, make sure you have read
Installation requirements
on
page
17
. Please note that the following instructions are for installation without using a
drain hose. For instructions for using a drain hose, see the next section,
Drain hose (if
necessary)
. For convenience, consider installing the dryer next to your washing machine.
A
B
1.
Gently slide the dryer into the desired
location.
2.
Use a
level (A)
and check the levelness
of the dryer from side to side and front
to back.
3.
If the dryer is not level, adjust the
levelling leg (B)
. Turning the leg
counter-clockwise retracts the leg.
Turning the leg clockwise extends the
leg.
4.
Once the dryer is level, make sure the
dryer stands firmly on the floor.
5.
Plug in the dryer.
C
D
NOTE
• To set the dryer to the same height
as the washing machine,
fully retract
(C)
the levelling legs by turning them
counter clockwise, then
loosen (D)
the
legs by turning them clockwise.
• Extend the levelling leg only as much
as necessary. Extending the levelling
leg more than necessary can cause the
dryer to vibrate.
DV10R8540GW_DC68-03913B_EN.indd 19
2019/3/6 15:51:18