Installation
English
20
Installation
Drain hose (if necessary)
A
1.
Insert the drain hose to the
drain hole
(A)
on the bottom-rear of the dryer.
2.
Insert the other end of the hose in the
drain hole on the floor.
NOTE
You can use the provided cable ties to
arrange the drain hose through to the
drain hole. Make sure the hose is not
damaged or bent.
CAUTION
• For proper drainage, the maximum height of the drain hose must be less than 90 cm
from the floor.
• To prevent backflow, make sure the drain hose is not submerged in water.
• To prevent a leak on the floor, make sure the drain hose is inserted properly into the
drain hole (A)
.
DV10R8540GW_DC68-03913B_EN.indd 20
2019/3/6 15:51:18