English
Installation
English
18
STEP 3
Connect the drain hose
• We strongly recommend connecting the drain hose
to your drainage system.
• If the drain hose connected on the dryer is too
short to reach the drainage system, use the
provided accessory hose (long drain hose).
• Use the built-in water tank only if you cannot
connect the drain hose to a drainage system.
NOTE
As a factory default, this dryer is set to use the built-in
water tank to drain condensed water.
A
B
1.
Remove the drain hose from
hole (A)
, and insert it
into
part (B)
.
A
2.
Insert one end of the accessory hose (long drain
hose) into
hole (A)
.
3.
Insert the other end (outlet) of the accessory hose
to the drainage system in one of the following
ways:
Untitled-2 18
8/11/2020 3:35:41 PM
