English - 19
8.
Move the position of the screw at the back of the door-hinge.
9.
Fasten the screw in the bottom hole.
10.
Remove the two screws holding the front-frame at the left.
11.
Remove the two screws holding the holder-lever at the left.
12.
Now, move to the right side of the product and fasten the two screws
holding the front-frame and the two screws holding the lever-holder.
13.
Align the door with the fixing holes.
14.
Fasten the two screws holding the door-hinge.
You can restore the direction the door opens by following the procedures above, if necessary.
Holer-Lever
Inside the drum
INST
ALLING YOUR DR
YER
DV80H4000CX-03408E-03_EN.indd Sec3:19
DV80H4000CX-03408E-03_EN.indd Sec3:19
2014-11-28 2:41:21
2014-11-28 2:41:21
Summary of Contents for DV80H4100CW
Page 38: ...English 38 note ...
Page 39: ...note ...