English - 24
DELAY END
You can set the dryer to finish your drying cycle automatically at a later time, choosing a delay of between
1 to 19 hours (in 1 hour increments). The hour displayed indicates the time at which the dry will be finished.
The Delay End settings range from 1 hour to 19 hours, depending on the course.
1.
Manually or automatically set your drying machine according to the type of laundry you are drying.
2.
Press the
Delay End
button repeatedly until the required delay time is set. If the delay time is set, the
“Delay End” function becomes ON state.
3.
Press the
Start/Pause
button. The “Delay End
” indicator will blink and the clock will begin counting
down until it reaches the set time.
4.
To cancel a Delay End function, press the
Power
button and then turn the dryer on again.
INTERIOR LAMP (ON SOME MODELS)
Lights the dryer drum while the dryer is running.
Setting & releasing
If you want to set or release the Interior Lamp, press both the
Lamp
buttons simultaneously.
This can be set as long as the power is turned on. If you do not turn the Drum Light off
within 5 minutes of turning it on, it is automatically turned off.
operating Instructions, tips
DV80H4000CX-03408E-03_EN.indd Sec5:24
DV80H4000CX-03408E-03_EN.indd Sec5:24
2014-11-28 2:41:23
2014-11-28 2:41:23
Summary of Contents for DV80H4100CW
Page 38: ...English 38 note ...
Page 39: ...note ...