English
- 5
G
etting Started
CD-R/-RW
Use a 700MB (80 minutes) CD-R/-RW disc. If
possible, do not use a 800MB (90 minutes) or above
disc, as the disc may not play back.
If the CD-R/-RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, all recorded
fi
les may not play.
Some CD-R/-RW discs may not be playable with this
unit, depending on the device which was used to
burn them. For contents recorded on CD-R/-RW
media from CDs for your personal use, playability
may vary depending on contents and discs.
DVD-R Disc Playback and Recording
Once a DVD-R recorded in Video Mode is
fi
nalised,
it becomes DVD-Video.
You can record onto the available space on the disc
and perform editing functions such as giving titles to
discs and programmes and erasing programmes
before
fi
nalising.
When programming is erased from a DVD-R, that
space does not become available. Once an area on
a DVD-R is recorded on, that area is no longer
available for recording, whether the recording is
erased or not.
It takes about 30 seconds for the unit to complete
recording management information after recording
fi
nishes.
This product optimizes the DVD-R for each
recording. Optimizing is carried out when you start
recording after inserting the disc or turning on the
unit. Recording onto the disc may become
impossible if optimizing is carried out too many
times.
Playback may be impossible in some cases due to
the condition of recording.
This unit can play back DVD-R discs recorded and
fi
nalised with a Samsung DVD video recorder. It may
not be able to play some DVD-R discs depending on
the disc and the condition of the recording.
◆
•
•
•
◆
•
•
•
•
•
•
•
DVD-RW Disc Playback and Recording
Recording and playback can be performed on
DVD-RW discs in both the Video and VR Modes.
Once a DVD-RW recorded in both the Video and VR
Modes is
fi
nalised, you cannot perform additional
recording.
Once a DVD-RW recorded in Video Mode is
fi
nalised, it becomes DVD-Video.
In both modes, playback can be performed before
and after
fi
nalisation, but additional recording,
deleting and editing can not be performed after
fi
nalisation.
If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute Format. Be
careful when executing Format because all the
recorded data may be lost.
A DVD-RW blank disc is initialized to VR Mode when
fi
rst initialized.
DVD-RAM Disc Playback and Recording
Ensure that the recording mode is set to VR mode.
Otherwise, this product will not be able to play the
recording.
You cannot play a DVD-RAM in most DVD
components due to compatibility issues.
Only DVD-RAM standard Version 2.0. discs can be
played in this unit.
DVD-RAM recorded on this unit may not work with
other DVD components. To determine compatibility
with these DVD-RAM discs, refer to the user’s
manual for the player.
For cartridge type DVD-RAM discs, remove the
cartridge and use the disc only.
◆
•
•
•
•
•
•
◆
•
•
•
•
•
01392A_HR750_XEU-ENG-0423.indd 5
01392A_HR750_XEU-ENG-0423.indd 5
2007-04-24 9:31:31
2007-04-24 9:31:31
