ENGLISH
50
1. With the unit in Stop mode, press the MENU button.
2. Select
Setup
using UP/DOWN buttons, then RIGHT or ENTER button.
3. Select
Audio Setup
using UP/DOWN buttons, then press the RIGHT or ENTER button.
4. Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.
Dolby Digital Out
1. PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
NOTE:
NOTE:
Be sure to select the correct Digital Output or no audio will be heard.
MPEG-2 Digital Out
1. PCM
: Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2. Bitstream
: Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the Digital Audio Output.
DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
NOTE:
NOTE:
• How to make the Setup menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Setting Up the Audio Options
AUDIO SETUP
DTS
: Off
Dynamic Compression : On
PCM Down Sampling : On
Dolby Digital Out
: PCM
MPEG-2 Digital Out
: PCM
00184P-L200W(ENG) 8/28/03 9:55 AM Page 50