English
_
●
CO
nn
ECT
ing &
SETT
ing
UP
HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
- Though the HDD & DVD Recorder uses a HDMI cable (not supplied), the HDD & DVD Recorder outputs only a pure
digital signal to the TV.
- If TV does not support HDCP (High -bandwidth Digital Content Protection), snow noise appears on the screen.
Why does Samsung use HDMI?
Analogue TVs require an analogue video/audio signal. However, when playing a DVD, the data transmitted to a TV is
digital. Therefore either a digital-to-analogue converter (in the HDD & DVD Recorder) or an analogue-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss.
HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the HDD & DVD
Recorder to your TV.
What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via HDMI from
being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV,
projector. etc). Content is encrypted at the source device to prevent unauthorised copies from being made.
COnnECTing TO aV in 3, DV inPUT JaCK
This allows you to connect your HDD & DVD Recorder to other external devices and view or record their outputs.
Case 1
: Connecting a VCR, Set-Top Box(STB), DVD player or Camcorder to the AV IN 3 jacks
Case 2
: Connecting a DV Device to the DV IN jack
Case 1 : Connecting a VCr, Set-Top Box(STB), DVD player or
Camcorder to the aV in 3 jacks
Connecting a VCR or external device to AV IN 3 jacks of the HDD & DVD Recorder. You can record from
connected equipment (VCR, STB, DVD player or Camcorder).
AV IN 3 selection will be automatically done.
If the input is not selected automatically, use
SOURCE
button to select proper input.
Copy protected content cannot be recorded.
`
`
`
~
~
M
`
`
red
Yellow
White