English - 79
R
ef
er
enc
e
Problem
Explanation/Solution
icon appears on
the screen.
You cannot use the operation or function due to one of the following reasons:
(1) Your DVD disc does not support the feature (for example, angles)
(2) You’ve requested a title, chapter, or scan time that is out of the correct range.
Play mode settings are
diff erent from the
settings confi gured
with the Setting menu.
The disc does not support all the selected functions.
In this case, some settings you confi gure on the Setting menu may not work properly.
Cannot change the
aspect ratio.
Aspect ratio is fi xed for DVD disc.
No audio output.
Check whether you selected correct digital output options in the Audio Output Options menu.
No video or audio output.
The disc tray is ejected after
2 to 5 seconds.
Did you move your DVD Recorder suddenly from a cold place to a warm place? In this case, do
not connect the plug to the power outlet and wait for two hours.
Then insert the disc and try to play again. It will work properly when condensation has
evaporated.
Angle operation does not
work during playback of
a DVD disc.
Angle operation is available only when the disc contains images captured at diff erent angles.
The disc revolves, but no
image or bad quality
images are output.
• Check whether there is damage or foreign materials on your disc.
• Some discs with bad manufacturing quality may not be played back.
• If the scene changes from dark to bright suddenly, the screen may jitter temporarily, but it is
not a defect.
Desired audio language
and subtitle language
are not played.
Audio languages and subtitle languages are disc-specifi c.
Only the sound and subtitle languages contained on a DVD disc are available and displayed on
the disc menu.
No progressive
output.
• Check whether you selected correct Progressive options in the Video Options.
The remote control
doesn’t work.
• Point the remote control at the remote control sensor on your DVD Recorder. Operate within
distance. (15ft)
Remove obstacles between your DVD Recorder and remote control.
• Check whether the batteries are depleted.
Other problems
• Read the table of contents and then fi nd and read the sections describing your problem, and
follow the directions given.
• Turn the unit off and on.
• If your problem still persists, contact your nearest Samsung service centre.
No HDMI output.
(DVD-SR275M only)
• Check the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of the DVD Recorder.
• See if your TV supports this 576p/720Pp/1080i/1080p DVD Recorder.
Abnormal HDMI output
screen. (DVD-SR275M
only)
• If snow noise appears on the screen, it means that TV does not support HDCP
(Highbandwidth Digital Content Protection).
HDMI output Jitter
(DVD-SR275M only)
• Check your TV system setup correctly.
• Screen Jitter may occur when the frame rate is converted from 50Hz to 60Hz for 720p/1080i/
1080p HDMI (High Defi nition Multimedia Interface) Output.
• Please refer to the user’s manual of your TV.
Troubleshooting (DVD)
