ENG-11
ENG-10
Menu Language
Manual Clock Set
To change the on-screen MENU language to English,
French or Spanish, follow these steps.
1
Open “MENU”
Press the MENU button while the DVD is in Stop or
Play mode.
2
Select “SETUP”
Using the UP/DOWN buttons, move the selection
bar to “SETUP” then press ENTER to select.
3
Select “Language”
Use the UP/DOWN buttons to highlight “Language”
then press the ENTER button.
4
Set menu Language
Place the selection bar next to your desired
Language, then press the ENTER button.
If Auto Setup fails to set the DVD-VCR’s internal clock
by locating a local TV station, follow these steps to set
the date and time manually.
NOTE: For accurate Timer Recording, your DVD-VCR's
internal clock must be set correctly.
1
Open “MENU”
Press the MENU button while the DVD is in Stop or
Play mode.
2
Select “SETUP”
Using the UP/DOWN buttons, move the selection
bar to “SETUP” then press ENTER to select.
3
Select “Clock”
Use the UP/DOWN buttons to highlight “Clock ”
then press the ENTER button.
4
Select “Manual Clock”
Move the highlight to “Manual Clock”, then press
the ENTER button.
• The Clock Set/Adjust menu will change as shown.
5
Set the Clock
Use the LEFT/RIGHT buttons to select each of the
following options, then use the UP/DOWN buttons
to set each option:
• Hour – Set the hour
• Month – Set the month.
• Minute – Set the minute. • Day – Set the day.
• Year – Set the year
6
Confirm Settings
Press the RETURN button to confirm your clock
settings and to return to the Clock Set/Adjust.
• Press the RETURN button three times to exit the
menu.
Language : English
Auto Power Off : Off
Language : English
Auto Power Off : Off
Language : English
Auto Power Off : Off
Manual Clock
2004 THU
Basic VCR Operation
Basic TV Tuner Operations
On-Screen Menu Navigation
To play a standard VHS videotape, just insert it into the
VCR deck and press the PLAY button. You can turn on
the Auto Play to enable the VCR deck to play
automatically when you insert a videotape that is
missing the Record Safety Tab. See page 27.
1
Insert VHS Tape
Insert a standard VHS videotape into the VCR
deck.
• When a videotape is inserted, power will turn on
automatically.
2
Play Tape
Press the
❿
ll(PLAY/PAUSE) button on the remote
control or on the front panel of the unit. The
videotape will begin to play automatically if it is
missing the Record Safety Tab and Auto Play is
turned on. See page 27.
3
Stop Playback
Press the
■
(STOP) button on the remote control or
on the front panel of the unit.
4
Additional VCR Options
• See pages 26~28 for special VCR Playback
features.
• See pages 29~30 for VCR Recording features.
• See page 31 for Timer Recording features.
The on-screen menus allow you to enable or disable
various functions on your DVD-VCR. Use the following
buttons to open and navigate through the on-screen
menus.
1
MENU Button
Press this button while the DVD is in Stop or Play
mode to open the on-screen MAIN MENU.
2
UP/DOWN and LEFT/RIGHT
Use these buttons to move the selection bar
UP/DOWN and LEFT/RIGHT to cycle through the
menu options.
3
ENTER Button
Press this button to confirm any new settings.
4
RETURN Button
Press this button to return to the last MENU screen
displayed or to exit the on-screen MENU all together.
When watching TV using the DVD-VCR's built-in TV
tuner, use the buttons below.
1
Channel UP/DOWN
Use these buttons to move to the previous or the
next channel.
2
0-9 Buttons
Use these buttons to select the desired channel
directly.
• Press the button number one for two seconds to
activate the button 100+.
- This function is activated only on Cable TV mode.
3
INFO. Button
Press this button to display the current channel.
• This also works in DVD and VCR mode.
Language : English
Auto Power Off : Off
00367A DVD-V4500/XAC-ENG 12/10/03 10:57 AM Page 10
