26
27
GB
GB
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➢
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Go To 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
or
❷
buttons, until the
Go To (0:00:00)
option is selected.
2
Press the OK or
❿
.
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
After pressing the SEARCH, press the corresponding
or
❷
buttons, until the
End Search
option is selected.
2
Press the OK or
❿
.
2
1
1
2
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq.
etc.
OK
VCR
1
Playing a Sequence Frame by Frame
Playing a Sequence at Variable Speeds
You can:
◆
Stop the cassette at a given frame (image)
◆
Advance one frame at a time
➢
No sound is heard when playing back frame by frame.
1
Press:
◆
❿
ll to start playing the cassette
◆
❿
ll button one more time to make still mode.
◆
F.ADV/STEP to advance frame by frame
2
To return to normal playback, press
❿
ll.
➢
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
(
or
)
buttons to minimize this effect.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
➢
No sound is heard when playing a sequence at variable
speeds.
1
Press:
◆
❿
ll during playback
◆
SHUTTLE (<<) to play the cassette backwards
◆
SHUTTLE (>>) to play the cassette forwards
2
Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE
REVERSE
REVERSE
SLOW
SLOW
PLAY
PLAY
PLAY
PLAY
PLAY
PLAY
RPLAY
STILL
MOTION
MOTION
PLAY
2PLAY
X3
X5
X9
X9
X5
X3
X1/10
X1/5
KARAOKE SEARCH
KARAOKE
PROG
/
TRK
VOLUME
1
1
1
VCR
VCR
