Samsung DVD-V62K, Instruction Manual

28

29

GB

GB

Using the Tape Counter

The tape counter:

◆

Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)

◆

Is reset when a cassette is inserted in the DVD-VCR

◆

Allows you to find the beginning of a sequence easily

☛

If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used. 

1

Insert a cassette in your DVD-VCR.

2

To set the tape counter to zero at the beginning of a sequence:

◆

Press INFO. twice to display the counter

◆

Press CLEAR when you want to set the tape counter to zero

3

When you are ready,  

◆

Start playback or Recording. 

◆

Press the 

■

button.

◆

To fast-froward or rewind to the sequence at which the
counter was set to zero, press 

➛➛

or 

❿❿

.

➢

Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 19).

Press INFO.:

◆

Once to display the current function, programme
number, recording speed, date, time and counter

◆

Twice to display the counter only

◆

Three times to display the time remaining on the
cassette

◆

Four times to clear the display

0:00:00

PROG

/

TRK

KARAOKE   SEARCH

KARAOKE

VOLUME

2

VCR

Searching for a Specific Sequence

Intro Scan

1

After pressing the SEARCH, press the corresponding 

œ

or

❷

buttons, until the 

Intro Scan

option is selected.

2

Press the OK or  

❿

.

3

Press the 

➛➛

or 

❿❿

buttons depending on the direction 

where your desired programme is located. 

4

When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.

5

If you want to watch the tape from a particular Index, simply press

❿

II

. 

I

ndex Skip Search:

This feature will enable you to fast forward/rewind to a specific
point on a tape:  E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button. 

1

After pressing the SEARCH, press the corresponding 

œ

or

❷

buttons, until the 

Intro Scan

option is selected.

2

Press the OK or 

❿

.

3

Press the 

➛➛

or 

❿❿

buttons twice more. This will take 

you directly to the start of the desired programme is located.   

4

These Index searches can be made forwards: (press 

❿❿

) or 

backwards: (press 

➛➛

). (

➛➛

-20  

●    

●        

0  

●    

●        

+20 

❿❿✌

5

To cancel an Index search simply press the 

❿

II

or 

■

button. 

2

2

        INTRO SCAN    : 

   INDEX SEARCH  :          -  6

VCR