10
-
English
C
onnections
Connecting DVD-VCR to the
TV using the Component
Video Cable (DVD Only)
Your TV must support progressive scan input to allow
you to watch component video output.
You will enjoy high quality accurate colour reproduction
images. Component video seperates the picture
element into black and white(Y), blue(P
b)
, red(P
r
) signals
to present most clear and clean images.
1
Connect Component video cables between the
COMPONENT VIDEO OUT
jacks on the rear of
the DVD-VCR and
COMPONENT VIDEO IN
jacks
on the rear of the TV.
2
Connect audio cables between the
AUDIO LINE
OUT
jacks on the rear of the DVD-VCR and
AUDIO IN
jacks on the rear of the TV.
• Take care to respect the colour coding of the left
and right channels.
COMPONENT VIDEO IN
COMPONENT INPUT
1
2
COMPONENT VIDEO OUT
❚
Progressive Scan
If the TV connected supports Progressive Scan,
press the
PROGRESSIVE
button on the front panel
in stop mode.
• The Progressive Scan feature is only available
for DVD. Activate it in DVD Stop mode.
• The message “Press
OK
to confirm Progressive
scan mode. Otherwise press
RETURN
.” will be
displayed. If you want Progressive scan mode,
select OK. Make sure that the disc has stopped
completely before changing the mode.
• To cancel the progressive scan mode, press the
PROGRESSIVE
button in stop mode.
• Make sure that the colour coded connections
match. That is, the Y, P
b
and P
r
component
output jacks of your DVD -VCR should be
connected to the exact corresponding component
input jacks on your TV. Otherwise, red or blue
images will be displayed on the TV screen.
If your TV does not have Progressive scan
mode, there will be no signal on the screen.
If you press the
PROGRESSIVE
button, it
will be changed to Interlace scan mode.
See your TV User’s Manual to find out if
your TV supports Progressive Scan.
If Progressive Scan is supported, follow the
TV User’s instructions regarding
Progressive Scan settings in the TV’s menu
system.
Depending on your TV, the method of
connection may differ from the illustration
above.
What is "Progressive Scan"?
Progressive scan has twice as many
scanning lines as the interlace output
method has. Progressive scanning method
can provide better and clearer picture
quality.
You must connect the player to the
component(s) before using the Progressive
Scan feature.
Use the Component Video connection
method only for the DVD.
NTSC DVD disk is not supported.
Note
