18
-
English
Playing a Sequence Frame by
Frame
Searching for a Specific Sequence
You can vary the playback speed using the
Shuttle function (up to nine times the normal
speed). Example: You wish to analyse a sports
person’s technique, movement by movement.
• No sound is heard when playing a sequence
at variable speeds.
1
Press the :
•
ll
button to start playing the cassette.
•
SHUTTLE
(
<<
) button to play the cassette
backwards.
•
SHUTTLE
(
>>
) button to play the cassette
forwards.
2
Each time you press the
SHUTTLE
button,
the speed is changed as shown in the
following illustration.
You can
• Stop the cassette at a given frame (image)
• Advance one frame at a time
No sound is heard when playing back frame by
frame.
1
Press the :
•
ll
button to start playing the cassette.
•
ll
button again to make still mode.
•
F.ADV
button to advance frame by frame.
•
ll
button to return to normal playback.
• Vertical stability: When playing back frame
by frame, interference may be seen on the
screen. Press the
TRK
(
or
) button to
minimize this effect.
REVERSE
PLAY
X9
REVERSE
PLAY
X5
REVERSE
PLAY
X3
STILL
SLOW
MOTION
X1/10
SLOW
MOTION
X1/5
PLAY
PLAY
X3
PLAY
X5
PLAY
X9
Playing a Sequence at Variable
Speeds
Each time you record a cassette on this DVD-
VCR, an “index” is automatically marked on the
tape when recording starts. The Search function
allows you to fast-forward or rewind to a specific
index and start playback from that point.
Depending on the direction selected, the index-
es are numbered as follows:
• This DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize
any indexes marked by other VCRs using the
same system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for
the 0:00:00 counter position on a cassette.
Press the
CLEAR
button at the point on the
tape where you want to set the counter to
0:00:00. The VCR will rewind or fast forward,
searching for the 0:00:00 counter position, and
then automatically stop at that position.
1
Press the
MENU
button, then press the
or
button to select
FUNC
. The
Function
menu is displayed. Press the
OK
or
button.
2
Press the
or
button to select
VCR
Function
, then press the
OK
or
button.
The
VCR Function
menu is displayed with
the
Go To [0:00:00]
selected.
• It can be displayed simply by pressing the
SEARCH
button.
etc.
2
1
1
2
etc.
Prev
Seq.
Seq. being
played
Next
Seq.
➔
3
Press the
OK
or
button again.
SETUP
DVD
VCR
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU
AFR 6600K ENG 4 27/07/2006 08:52 Page 18
