English
-
11
Connecting DVD-VCR to the TV
using the S-Video Cable (DVD only)
You will enjoy high quality images. S-Video
seperates the picture element into black and
white(Y) and colour(C) signals to present clearer
images than regular video input mode.
1
Connect one end of the S-Video cable into
the
S-VIDEO
output jack on the rear of the
DVD-VCR.
2
Plug the other end of the S-Video cable into
the appropriate input connector on the televi-
sion.
3
Connect one end of the audio cables supplied
into the
AUDIO LINE
output jacks on the rear
of the DVD-VCR.
• Take care to respect the colour coding of
the left and right channels.
4
Plug the other end of the audio cables into
the appropriate input connectors on the televi-
sion.
• Use the S-Video connection method only for
the DVD.
Connecting DVD-VCR to the TV
using the Component Video Cable
(DVD only)
Your TV must support progressive scan input to
allow you to watch component video output.
You will enjoy high quality accurate colour repro-
duction images. Component video seperates the
picture element into black and white (Y), blue
(Pb), red (Pr) signals to present most clear and
clean images.
1
Connect Component video cables between
the
COMPONENT VIDEO OUT
jacks on the
rear of the DVD-VCR and
COMPONENT
VIDEO IN
jacks on the rear of the TV.
2
Connect audio cables between the
AUDIO
LINE OUT
jacks on the rear of the DVD-VCR
and
AUDIO IN
jacks on the rear of the TV.
• Take care to respect the colour coding of
the left and right channels.
COMPONENT VIDEO OUT
COMPONENT INPUT
COMPONENT VIDEO IN
1
2
Note
3
2
4
1
XEU ENG 2 11/22/06 2:28 AM Page 11