background image

30

English

Playing a Sequence Frame by
Frame

Searching for a Specific Sequence

You can vary the playback speed using the
Shuttle function (up to nine times the normal
speed). Example: You wish to analyse a sports
person’s technique, movement by movement.
• No sound is heard when playing a sequence 

at variable speeds.

1

Press the :

• 

Š

ll

button to start playing the cassette.

• 

SHUTTLE

(

<<

) button to play the cassette 

backwards.

• 

SHUTTLE

(

>>

) button to play the cassette

forwards.

2

Each time you press the 

SHUTTLE

button,

the speed is changed as shown in the
following illustration.

You can

•  Stop the cassette at a given frame (image)
•  Advance one frame at a time

No sound is heard when playing back frame by
frame.

1

Press the :
• 

Š

ll

button to start playing the cassette.

• 

Š

ll

button again to make still mode.

• 

F.ADV 

button to advance frame by frame.

• 

Š

ll

button to return to normal playback.

• Vertical stability: When playing back frame

by frame, interference may be seen on the
screen. Press the

TRK

(

›

or

‚

) button to

minimize this effect.

REVERSE 

PLAY

X9

REVERSE

PLAY

X5

REVERSE

PLAY

X3

STILL

SLOW

MOTION

X1/10

SLOW

MOTION

X1/5

PLAY

PLAY

X3

PLAY

X5

PLAY

X9 

Playing a Sequence at Variable
Speeds

Each time you record a cassette on this DVD-
VCR, an “index” is automatically marked on the
tape when recording starts. The Search function
allows you to fast-forward or rewind to a specific
index and start playback from that point.
Depending on the direction selected, the index-
es are numbered as follows:

• This DVD-VCR uses a standard indexing

system (VISS). As a result, it will recognize
any indexes marked by other VCRs using the
same system and vice versa.

Go To [0:00:00] Stop

Use this feature when you want to search for
the 0:00:00 counter position on a cassette.
Press the 

CLEAR

button at the point on the

tape where you want to set the counter to
0:00:00. The VCR will rewind or fast forward,
searching for the 0:00:00 counter position, and
then automatically stop at that position.

1

Press the 

MENU

button, then press the 

›

or

‚

button to select 

FUNC

. The 

Function

menu is displayed. Press the 

OK

or 

Š

button.

2

Press the 

›

or 

‚

button to select 

VCR

Function

, then press the 

OK

or 

Š

button. 

The 

VCR Function

menu is displayed with

the 

Go To [0:00:00]

selected.

•  It can be displayed simply by pressing the 

SEARCH

button.

etc.

2

1

1

2

etc.

Prev
Seq.

Seq. being

played

Next
Seq. 

SETUP

DVD

VCR

PROG

FUNC

VCR Function

Go To [0:00:00]

End Search

Intro Scan

OK           RETURN      MENU

3

Press the 

OK

or 

Š

button again.

XEU ENG 4   11/2/06  4:45 AM  Page 30

Summary of Contents for DVD-V6700S

























































Reviews: