background image

32

English

The tape counter:
• Indicates the elapsed time in the play and 

record modes (Hours, Minutes and Seconds).

• Is reset when a cassette is inserted in the

DVD-VCR.

• Allows you to find the beginning of a sequence 

easily.

• If the remaining time is to be calculated

correctly, you must indicate the type of
cassette being used.

1

Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the begin-
ning of a sequence:

• Press the 

INFO

button twice to display the 

counter.

• Press the 

CLEAR

button when you want to 

set the tape counter to zero.

2

When you are ready,
• Start Playback or Recording.
• Press the 

button.

• To fast-froward or rewind to the sequence at 

which the counter was set to zero, press the

¥¥

or

ŠŠ

button.

• Some DVD-VCR information, such as the 

counter, can be displayed on the television
screen (Unless you have deactivated the 

Screen Messages

mode; refer to page 23).

Press the 

INFO

button:

• Once to display the current function,

programme number, recording speed, time 
and counter.

• Twice to display the counter only.
• Three times to display the time remaining on

the cassette.

• Four times to clear the display.

Using the Tape Counter

0:00:00

XEU ENG 4   11/2/06  4:45 AM  Page 32

Summary of Contents for DVD-V6700S

























































Reviews: