Samsung DVD-V72K, Instruction Manual

GB

Presetting the Stations Manually

19

☛

You do not need to preset the stations manually if you
have already set them automatically.

1

Press the SETUP button on the remote control.
Result:

The MAIN MENU is displayed.

2

Press the corresponding 

,

or  ,  buttons to select the

Install 

option.

3

Press the ENTER button to select this option.
Result:

The 

I N S T A L L A T I O N

menu is displayed.

4

Press the corresponding 

or

buttons, until the  

MANUAL SET 

U P

option is selected.

5

Press the ENTER button to select a  

MANUAL SET UP

option.

Result:

The 

TV STATION TABLE

menu is displayed.

6

Press the 

or 

buttons to select a programme number as 

required. 

7

Press the  button to preset the station.
Result:

The 

MANUAL TUNING

menu is displayed.

8

Press the 

or

buttons to start scanning.

Result:

The frequency band is scanned and the first station
found is displayed.

9

Press the 

or

buttons until the  

N A M E

is selected.

The station name is set automatically from the broadcast signal.

10

To change the programme’s name, press the  button. 
Result:

The first letter of the name flashes. 

11

To...

Then...

Select a character 

Press the 

or

button until the 

in the name

required character is displayed 
(letters, numbers or “-” character).

Move to the next or

Press the  or 

buttons 

previous character

respectively.

12

If you...

Then...

Wish to store the

◆

Press the 

or

buttons until the 

M F T

station displayed

is selected.

◆

Press the 

or

buttons to adjust the 

picture, if necessary.

◆

Press ENTER to store the station

Do notwish to 

◆

Press the 

or 

buttons until the  

store the station

C H

is selected.

displayed 

◆

Press the 

or

buttons to go on 

scanning the frequency band and display
the next station

◆

Go back to the beginning of step 

12

13

Repeat this procedure from Step 

6

onwards, until all the required

stations have been stored.

14

On completion, press the RETURN button three times to exit the
menu.

GB

18

Presetting the Stations Automatically

☛

You do not need to preset the stations if you have already 

set them automatically (see Plug & Auto Set Up on page 13).

Your DVD-VCR contains a built-in tuner used to receive television
broadcasts. 
You must preset the stations received through the tuner. This can
be done:

◆

Plug & Auto Set up (see page 13)

◆

Automatically

◆

Manually  (see page 19)

You can store up to 80 stations.

1

Press the SETUP button on the remote control.
Result:

The MAIN MENU is displayed.

2

Press the corresponding 

,

or  ,  buttons to select the

I n s t a l l

option.

3

Press the ENTER button to select this option.
Result:

The 

I N S T A L L A T I O N

menu is displayed.

4

Press the corresponding 

or

buttons, until the   

AUTO SET

U P

option is selected.

And then press the ENTER button to select this option.
Result:

A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.

5

Press ENTER to start the auto scanning.
Result:

◆

The 

P L E A S E   W A I T

indication flashes on the

television screen. 

◆

The first frequency band is scanned and the first
station found is displayed and stored.

◆

The DVD-VCR then searches for the second station
and so on.

◆

When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to 
programme  1.

➢

The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.

6

If you wish to cancel the auto scanning before the end, press the 
RETURN button three times to exit the menu.

➢

◆

Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).

MAIN MENU

INSTALLATION

RETURN          

ENTER

INSTALLATION

AUTO SET UP

MANUAL SET UP
VCR OUTPUT CH  :CH38

RETURN                    

ENTER

INSTALLATION

AUTO SET UP

MANUAL SET UP

VCR OUTPUT CH  :CH38

RETURN                    

ENTER

AUTO SET UP

PLEASE WAIT

2

%

I - - - - - - - - - - - - - - - - - - - - I

RETURN

YOUR DATA WILL BE LOST

PRESS 

E N T E R

TO CONTINUE

R E T U R N

TO EXIT

TV STATION TABLE

PR    CH    NAME 

1

2
3
4
5

SWAPPING:ENTER

RETURN                    

DELETE:CLEAR

MANUAL TUNING

P R

:  1

C H

: ---

M F T

:  -

N A M E

: ----

MEMORY:ENTER

RETURN

VCR

VCR

MAIN MENU

INSTALLATION

RETURN          

ENTER

00078A DVD-V72K/XSA-GB2  6/25/02 11:43 AM  Page 18