GB
23
GB
22
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
"
,
❷
buttons to select the
VCR Setup
option.
3
Press the ENTER button to select this option.
4
Press the corresponding
"
,
❷
buttons to select the
Installation
menu.
5
Press the ENTER button to select this menu.
Result:
The
INSTALLATION
menu is displayed.
6
Press the
"
or
❷
buttons, until the
VCR OUTPUT CH
option is
selected.
7
Select the required output channel (CH21~CH69) by pressing the
➛
or
❿
buttons (Australia:CH28 ~ CH69).
8
On completion, press RETURN twice to exit the menu.
Then tune your television again (see page 14).
DVD
Clock Set
Installation
Tape Select
E180
Repeat play
OFF
OSD
ON
Return
Enter
Language
DVD Setup
VCR Setup
Option
Program
Parental
DVD
DVD
DVD
DVD
DVD
Changing the Preset Station Table
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1
Press the SETUP button on the remote control.
2
Press the corresponding
"
,
❷
buttons to select the
VCR Setup
option.
3
Press the ENTER button to select this option.
4
Press the corresponding
"
,
❷
buttons to select the
Installation
menu.
5
Press the ENTER button to select this menu.
Result:
The
INSTALLATION
menu is displayed.
6
Press the corresponding
"
or
❷
buttons, until the
MANUAL SET
UP
option is selected.
7
Press the ENTER button to select this option.
Result:
The
TV STATION TABLE
menu is displayed.
8
Press the corresponding
"
or
❷
buttons, until the required preset
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
9
To change the programme number assigned to a station press the
ENTER button on the remote control (For example; To move a TV
station in programme 1 to programme 3).
10
Press the
"
or
❷
buttons to select required position and the press
ENTER again to swap the position.
11
On completion, press the RETURN button to exit the menu.
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
"
❷
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SWAPPING:ENTER
RETURN
DELETE:CLEAR
TV STATION TABLE
PR CH NAME
1
2
3 003
4
5
"
❷
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SWAPPING:ENTER
RETURN
DELETE:CLEAR
DVD
Clock Set
Installation
Tape Select
E180
Repeat play
OFF
OSD
ON
Return
Enter
Language
DVD Setup
VCR Setup
Option
Program
Parental
DVD
DVD
DVD
DVD
DVD
VCR
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
"
,
❷
buttons to select the
VCR Setup
option.
3
Press the ENTER button to select this option.
4
Press the corresponding
"
,
❷
buttons to select the
Installation
menu.
5
Press the ENTER button to select this menu.
Result:
The
INSTALLATION
menu is displayed.
6
Press the
"
or
❷
buttons, until the
TV SYSTEM
option is
selected.
7
Press the
➛
or
❿
button to select G or K.
8
On completion, press RETURN to exit the menu.
VCR
VCR
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN
"
❷!!!!
ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"
❷!!!!
ENTER
Newzealand Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN
"
❷!!!!
ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"
❷!!!!
ENTER
Newzealand Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"
❷!!!!
ENTER
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 22
