Samsung DVD-VR320/COM Manual Download

Page: 144 / 249

Operating Instructions

Samsung Electronics

13-19

ystem Setup

Setting Up the Audio
Options

Allows you to setup the audio device and sound staus
settings depending on the audio system in use.

With the unit in Stop mode/No Disc mode, press
the

MENU

button on the remote control.

Press the

…†

buttons to select

Setup

, then press

the

√

button.

Press the

…†

buttons to select

Audio

, then press

the

√

button.

Audio setup menu will be displayed.

Press the

…†

buttons to select the desired audio

option, then press the

√

button.

Press the

…†

buttons to select the desired item,

then press the

√

button.

Note

■

Press the

RETURN

button to return to

the previous menu. Press the

MENU

button to

exit the menu.

No Disc Setup

System

√

Clock Set

√

Install

√

Language

√

Audio

√

Video

√

Parental Control

√

MOVE

RETURN

EXIT

Programme

Setup

No Disc Audio

Digital Output

: PCM

√

DTS

: Off

√

Dynamic Compression

:On

√

MOVE

RETURN

EXIT

Programme

Setup

Digital Output

PCM

Converts to PCM(2CH) 48kHz
audio. Select PCM when using the
Analog Audio Outputs.

Bitstream

Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when
using the Digital Audio Output.

DTS

Off

: Doesn’t output digital signal.

Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS
Decoder.

Dynamic Compression

This is only active when a Dolby Digital signal is
detected.

Off

: You can enjoy the movie with standard Dynamic

Range.

: When Movie soundtracks are played at low vol-

ume or from smaller speakers, the system can
apply appropriate compression to make low-
level content more intelligible and prevent dra-
matic passages from getting too loud.

Note

30 -

English

When DTS soundtrack is played, sound is not
output from Analog Audio Output.

Be sure to select the correct Digital Output or
no audio will be heard.

Summary of Contents for DVD-VR320/COM


























































































































































































































































Search results

Summary of Contents for DVD-VR320/COM

Reviews:

Related manuals for DVD-VR320/COM

Brands by name

Popular brands

Samsung DVD-VR320/COM, Manual

Search results

Summary of Contents for DVD-VR320/COM

Reviews:

Related manuals for DVD-VR320/COM

Brands by name

Popular brands