Samsung DVD-VR320/COM Manual Download

Page: 186 / 249

Operating Instructions

Samsung Electronics

13-61

72 -

English

diting

Press the

button at the starting point.

The image and starting point time are displayed in
the section deletion starting point window.
Edit Title List Screen Elements

1 Playback bar
2 Playtime
3 Section deletion starting point window and time
4 Section deletion end point window and time

• Select the start and end points of the section

you want to delete using the playback related
buttons.

• Playback related buttons:

(

√

œœ

√√

œœ

√√

Press the

button at the end point.

The image and end point time are displayed in the
Section deletion ending point window.

Press the

…†

buttons to select

Delete

, then

press the

button.

Press the

œ √

buttons to select

YES

, then press

the

button. The selected section has been

deleted.

RETURN

MOVE

EXIT

Edit Title List

DVD-RAM(VR)

Sports(A1)

19/JAN/2005 11:50

00:10:10

Start

End

Delete

Return

Title List No. 05

Start 00:00:06

End 00:10:10

RETURN

MOVE

EXIT

Edit Title List

DVD-RAM(VR)

Sports(A1)

19/JAN/2005 11:50

00:00:10

Start

End

Delete

Return

Title List No. 05

Start 00:00:06

End 00:00:00

①

②

➂

➃

RETURN

MOVE

EXIT

Edit Title List

DVD-RAM(VR)

Sports(A1)

19/JAN/2005 11:50

00:10:10

Start

End

Delete

Return

Title List No. 05

Start 00:00:06

End 00:10:10

RETURN

MOVE

EXIT

Edit Title List

DVD-RAM(VR)

Sports(A1)

19/JAN/2005 11:50 P

00:10:15

Start

End

Delete

Return

Title List No. 05

Start 00:00:06

End 00:10:10

Do you want to delete?

(Deleted part will not be restored.)

Yes

■

The length of the section to be deleted must
be at least 5 seconds long.

■

If the length of the section to be deleted is
less than 5 seconds, you will be prompted
with the message 'The range is too short.'.

■

If the end time precedes the starting time,
you will be prompted with the message ‘End
point cannot be marked earlier than start
point’.

■

The section cannot be deleted when it
includes a still picture.

■

Press the

MENU

button after the operation

has finished.
The Title List screen will disappear.

Note

Summary of Contents for DVD-VR320/COM


























































































































































































































































Search results

Summary of Contents for DVD-VR320/COM

Reviews:

Related manuals for DVD-VR320/COM

Brands by name

Popular brands

Samsung DVD-VR320/COM, Manual

Search results

Summary of Contents for DVD-VR320/COM

Reviews:

Related manuals for DVD-VR320/COM

Brands by name

Popular brands