English
57
Troubleshooting
Information codes
If the dryer fails to operate, you may see an information code on the display panel. To
determine what you should do, check the list of codes in the table below, and then try the
suggested actions.
Code
Action
dC
Operating the dryer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
FC
Invalid power source frequency.
• Try restarting the cycle.
• If this information code remains, contact a Samsung service
center.
AC
Electronic control problem (Invalid Communication).
• Contact a Samsung service center.
HC
High temperature heating check.
• Clean the lint filter.
• If this information code remains, contact a Samsung service
center.
9C1
The electronic control needs to be checked.
• Check if power is supplied properly.
• If the information code remains, contact a Samsung service
center.
tC
The Thermistor1 resistance is very low or high.
• Check for a clogged lint screen.
• Check if the vent system is restricted.
• If this information code remains, contact a Samsung service
center.
tC5
The Thermistor2 resistance is very low or high.
• Check for a clogged lint screen.
• Check if the vent system is restricted.
• If this information code remains, contact a Samsung service
center.
dF
Incorrect door switch.
• Contact a Samsung service center.
If any information code keeps appearing on the display, contact a Samsung service center.
Untitled-5 57
2019-03-22 PM 7:09:23
Summary of Contents for DVE45R6100 Series
Page 1: ...Dryer User manual DVE G 45R6300 DVE G 45R6100 Untitled 5 1 2019 03 22 PM 7 09 13 ...
Page 65: ...Secadora Manual del usuario DVE G 45R6300 DVE G 45R6100 Untitled 2 1 2019 03 26 AM 11 53 55 ...
Page 130: ...Notas Untitled 2 66 2019 03 26 AM 11 54 09 ...