Installation
Installation
English
30
Installation check codes
Check code
Meaning
Solution
0
Vent condition is good.
Clg (Cg)
The vent is clogged.
1.
Clean the lint filter.
2.
Check your vent condition.
* You must take measures (such as
cleaning) through expert personnel.
C80 (C8)
About 80 % of the vent is clogged.
(This may decrease the drying
performance.)
C90 (C9)
Over 90 % of the vent is clogged.
(This may lead to poor drying
performance or cause malfunction)
Ct
The internal temperature of the
dryer is too low (below 32 °F (0 °C))
or too high (over 104 °F (40 °C)) and
therefore vent blockage cannot be
detected.
Leave the dryer at room
temperature (41~95 °F (5~35 °C))
for an hour and check again.
tC
Temperature sensor error
Contact a service center.
C1
Unit is detecting items inside the
drum or there is an error on the dry
sensor.
Remove items from the drum and
check again.
If the problem continues, contact a
service center.
dC
Unit is detecting door is open.
Close the door properly and check
again.
If the problem continues, contact a
service center.
9C1
Abnormal voltage detected.
Check the power connection. (Refer
to the “
section)
If the problem continues, contact a
service center.
HC
Detection of abnormal temperature
in drum.
Check the power connection.
Check the vent condition if the
problem continue, contact a service
center.
DV3400T_DC68-03784M-02_EN.indd 30
2020-12-07 10:47:20
Summary of Contents for DVE45T3400V Series
Page 1: ...Dryer User manual DVE G 45T3400 DV3400T_DC68 03784M 02_EN indd 1 2020 12 07 10 47 13 ...
Page 59: ...Memo DV3400T_DC68 03784M 02_EN indd 59 2020 12 07 10 47 30 ...
Page 119: ...Mémo DV3400T_DC68 03784M 02_CFR indd 59 2020 11 19 12 13 22 ...
Page 179: ...Notas DV3400T_DC68 03784M 02_MES indd 59 2020 11 19 12 10 41 ...