Before using the product for the fi rst time
_13
02 BEFORE USING
Before using the product for
the fi rst time
USING THE SOUND ON/OFF FUNCTION
1.
While holding down the
Delay Start
and
Half Load
buttons, press the
Power
button to
access the setting to activate/deactivate the
Sound On/Off
function.
2.
Press the
Sanitize
button to activate or deactivate the
Sound On/Off
function.
-
“Rinse Refi ll ”
indicator turns on to indicate that
Sound On
function has been activated.
-
“Rinse Refi ll ”
indicator turns off to indicate that
Sound Off
function has been activated.
Even though
Sound Off
function has been activated, the error sound plays when an error occurs.
3.
To exit the
Sound On/Off
setting, press the
Power
button.
USING RINSE AID
Filling the rinse aid reservoir
As soon as the rinse aid refi ll indicator lights up on the control panel , refi ll with rinse aid. Your dishwasher
has been designed to use liquid rinse aid only.
Using a powdered rinse aid will clog up the reservoir opening and cause the dishwasher to malfunction.
Rinse aid improves the drying performance of the dishwasher.
Do not add regular detergent into the rinse aid reservoir.
1.
Remove the rinse aid reservoir cap by rotating it counterclockwise.
2.
Fill the rinse aid reservoir with rinse aid.
Use the viewing port when fi lling the rinse aid.
Do not fi ll the reservoir above the rinse aid level as the rinse aid
may overfl ow during the wash cycle.
3.
Turn the rinse aid setting to a rinse aid amount between 1 and 6. The
higher the level, the more rinse aid will be used.
If you are unable to rotate the rinse aid leveller with ease, try using a
coin.
4.
Close the rinse aid reservoir cap by rotating it clockwise.
CAUTION
CAUTION
DD68-00135A_EN_130604.indd 13
DD68-00135A_EN_130604.indd 13
2013-06-07
1:42:24
2013-06-07
1:42:24
