background image

- AFTER SALES SERVICE

- Do not hesitate to contact your retailer or service agent

if a change in the performance of your product indicates
that a faulty condition may be present.

IMPORTANT NOTICE (United Kingdom)

The mains lead on this equipment is supplied with a moulded plug
incorporating a fuse. The value of the fuse is indicated on the pin face of
the plug and, if it requires replacing, a fuse approved to BSI1362 of the
same rating must be used. Never use the plug with the fuse cover omitted
if the cover is detachable.
If a replacement fuse cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are available from your
dealer. If the fitted plug is not suitable for the power points in your house
or the cable is not long enough to reach a power point, you should obtain
a suitable safety approved extension lead or consult your dealer for
assistance.
However, if there is no alternative to cut off the plug, remove the fuse and
then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock
hazard from the bared flexible cord.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following
code:

BLUE - NEUTRAL

BROWN - LIVE

As these colours may not correspond to the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with
the letter N or coloured BLUE or BLACK. The wire coloured BROWN
must be connected to the terminal marked with the letter L or coloured
BROWN or RED.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL,

WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH
SYMBOL    , OR COLOURED GREEN OR GREEN AND YELLOW.

AA68-01516C-00 (ENG)

Summary of Contents for DW21G6

















































Reviews: