English
34
Ins
tallation
Installation
STEP 9
Connect the drain hose
Max. 80 cm
Min. 30 cm
1.
Connect the drain hose to the drain
outlet.
CAUTION
• Install the drain system properly so that
the drain hose does not come out of the
drain outlet in the draining process.
• Make sure that the drain hose, supply
hose, and power cord is not kinked or
folded.
STEP 10
Final check
1.
Remove all foam, paper packaging, and unnecessary parts from inside the dishwasher.
2.
Turn the circuit breaker on.
3.
Open the water supply valve to supply water to the dishwasher.
4.
Plug in and turn the dishwasher on. Then, select and run the Quick cycle.
5.
Check if the dishwasher turns on normally and if there are any water leaks while the
dishwasher is operating. Make sure to check for water leaks on both ends of the water
line and the drain hose connector.
DW7500RM_DD81-02968A-01_EN.indd 34
2019-10-23 10:41:21
Summary of Contents for DW6 R704 BB
Page 74: ...Notizen DW7500RM_DD81 02968A 01_DE indd 74 2019 10 23 10 40 59 ...
Page 75: ...Notizen DW7500RM_DD81 02968A 01_DE indd 75 2019 10 23 10 40 59 ...
Page 150: ...Memo DW7500RM_DD81 02968A 01_EN indd 74 2019 10 23 10 41 31 ...
Page 151: ...Memo DW7500RM_DD81 02968A 01_EN indd 75 2019 10 23 10 41 31 ...