English
20
Ins
tallation
Installation
STEP 2
To insert the sub foot (Except Free Standing model)
If the distance between the floor and the bottom of the worktop is more than 850 mm,
insert the sub foot into the hole on the bottom of the dishwasher before you start the
installation.
850 ~
1.
Lay the dishwasher on its back.
CAUTION
Do not lay down the dishwasher on its side.
Water may leak.
2.
Find the sub foot in the installation kit,
and then insert the sub foot into the
hole on the bottom of the dishwasher as
shown in the figure.
STEP 3
Check the water line
• The water line pressure must be between 0.04 and 1.0 MPa.
• Make sure that the water temperature does not exceed 60 °C. Hot water over 60 °C may
cause the dishwasher to malfunction.
• Make sure that the water supply valve is turned off before connecting the water supply
line to the dishwasher.
DW7500RM_DD81-02968A-01_EN.indd 20
2019-10-23 10:41:18
Summary of Contents for DW6 R704 BB
Page 74: ...Notizen DW7500RM_DD81 02968A 01_DE indd 74 2019 10 23 10 40 59 ...
Page 75: ...Notizen DW7500RM_DD81 02968A 01_DE indd 75 2019 10 23 10 40 59 ...
Page 150: ...Memo DW7500RM_DD81 02968A 01_EN indd 74 2019 10 23 10 41 31 ...
Page 151: ...Memo DW7500RM_DD81 02968A 01_EN indd 75 2019 10 23 10 41 31 ...