4 _ Disassembly and Reassembly
Part
Figure
Description
SEAL TUB PACKING
[DISASSEMBLY]
BRACKET SEAL TUB
SEAL TUB PACKING
1. Remove the old seal from the BRACKET SEAL TUB.
WARNING
Be sure to remove the power plug before servicing
WARNING
Be careful to touch the BRACKET SEAL TUB after
removed the seal. It may cause injury from sharp edges.
SEAL TUB PACKING
[ASSEMBLY]
1. Put some water on new SEAL TUB PACKING to assemble
it easily. Fold the SEAL TUB PACKING in half with the tip
of the seal facing inward.
CAUTION
Pay attention to the direction of seal. If it is assembled
in reverse, it may cause leakage of steam or water.
SEAL TIP
Insert to Bracket seal tub
Seal tip faces to inside
Center
About 20cm
2. Assemble the SEAL TUB PACKING to center of the
BRACKET SEAL TUB. Press seal about 20 cm (red dotted
line) on both sides based on the center line.
About 3~4cm
3. Put Seal in the left & right side of the bottom.
The folded seal is about 3~4 cm long.
1-1-2. SEAL TUB PACKING
- SEAL TUB PACKING: DD62-00181A