English
63
Maint
enanc
e
Nozzles
To prevent the nozzles from being clogged or if the nozzles are clogged, remove and clean
each nozzle. Use caution when removing the nozzles as they may break.
Upper nozzle
1.
Open the door, and then pull out the
upper rack to reveal the upper nozzle.
2.
Loosen and remove the nut, and then
remove the nozzle.
3.
Unclog and clean the nozzle.
4.
Reinsert the nozzle, and then tighten the
nut by hand.
5.
Rotate the nozzle by hand to make sure
the nozzle is engaged correctly.
Lower nozzle
1.
Open the door, and then pull out the
lower rack. The lower nozzle is visible
on the bottom.
2.
Unclog and clean the nozzle.
3.
Reinsert the nozzle.
4.
Rotate the nozzle by hand to make sure
the nozzle is engaged correctly.
Internal Cleaning
Recommended internal cleaning every month. You can use the Self Clean cycle or the
Intensive cycle without putting in dishes.
If your tap water is hard, you can prevent limescale inside the dishwasher by adding citric
acid to the detergent when operating the dishwasher.
Europe_DW6500AM_WEB_DW0004_English.indd 63
2023-07-20 7:02:41