English - 14
10
Delay Start
Delay a cycle for up to 24 hours in one-hour increments. To increase the delay
start time, press or hold the
Delay Start
button. The hour displayed indicates
the time at which the wash will be started.
-
After
setting the delay time, press the
Start
button, and then close the
door to start the cycle.
-
If you want to change
the delay time once the dishwasher has started,
press the
Reset
button and turn off the dishwasher. Then, turn on the
dishwasher again and select a new cycle with a new delay setting.
11
Start
To start a cycle, press the
Start
button before closing the door.
*
Reset
: To cancel a currently running cycle and drain the dishwasher, press
and hold the
Start
button for three (3) seconds.
Once the dishwasher is reset, select a cycle and option, and then press
Start
to restart the dishwasher.
You can select options (Self Clean, Upper, Lower, Speed Booster, Sanitize, Dry+, Delay Start) before
starting a cycle. If you change the cycle after selecting an option, the original cycle is reset.
To prevent the touchpad from losing response sensitivity, follow these instructions:
• Touch the center of each keypad using one fi nger. Do not push.
• Clean the touch control’s surface regularly with a soft, damp cloth.
• Be careful not to touch more than one touch key pad at a time, except as directed.
Setting up your dishwasher
BU_DW9000H-00156A-07_EN.indd 14
BU_DW9000H-00156A-07_EN.indd 14
2016-09-20 12:31:38
2016-09-20 12:31:38
