Installing your dishwasher
_39
07 INS
T
ALLING Y
OUR DISHW
ASHER
Installing your dishwasher
BUILT UNDER, SEMI BUILT IN, FULLY BUILT IN DISHWASHER
Be sure that you or your installer follow these instructions closely so that your new dishwasher works
properly and that you’re not at risk of injury when washing dishes.
New installation
If the dishwasher is a new installation, most of the installation work must be done before the
dishwasher is moved into place.
Replacement
If the dishwasher is replacing an old dishwasher, you must check the exising dishwasher connections
for compatibility with the new dishwasher. Replace the existing connections as necessary.
STEP 1. SELECTING THE BEST LOCATION FOR THE DISHWASHER
The installation position of dishwasher should be near the existing inlet and drain hoses and power
cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the
dishwasher.
1.
Choose a place near the sink to facilitate the installation of inlet and drain hoses.
2.
Less than 5 mm between the top of dishwasher and cabinet and the outer door aligned to cabinet.
aximum
maximum
580
580
minimum
minimum
Electrical, drain
Electrical, drain
and water supply
and water supply
line entrances
line entrances
Space between cabient
Space between cabient
bottom and floor
bottom and floor
600 minimum
600 minimum
100
100
90°
90°
90°
90°
3.
If dishwasher is in stalled at the corner of the cabinet, there
should be some space when the door is opened.
cabinet
Dishwasher
Dishwasher
Door of
Door of
Dishwasher
Dishwasher
Minimum space
of 50 mm
Depending on where your electrical outlet is, you may need to cut a hole in the opposite cabinet side.
DW5500M-02437D-00_EN.indd 39
DW5500M-02437D-01_EN.indd 39
3/14/2017 5:30:49 PM
3/14/2017 5:30:49 PM
8 m
8 20-870
m
20-870
