English - 8
using your dishwasher
CONTROL PANEL
DW80M3021 Series
1
2
3
6
5
4
7
1
POWER
When you press the
POWER
button, the Cycle On light for the most recently
started cycle turns on. When the selected cycle is complete, the dishwasher
powers off automatically.
2
Cycle Selector
Select the appropriate wash cycle depending on the soil level of your dishes.
After you select a cycle, the cycle on light for that cycle lights up.
3
Hi-Temp Wash
Raises the main wash temperature to improve cleaning for loads containing
tough, baked-on food.
4
Sanitize /
(Control Lock)
The temperature rises to 163 ˚F (73 ˚C) in the fi nal rinse cycle for high
temperature sanitization.
If you select the
Sanitize
option, the “Sanitize” lamp blinks when the water
temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and
then remains illuminated until the
Sanitize
option ends. When you press the
POWER
button, the “Sanitize” lamp turns off.
The
Normal
cycle with the
Sanitize
option selected is NSF certifi ed.
The
Sanitize
feature operates in accordance with NSF/ANSI Standard
184 for Residential Dishwashers. Certifi ed residential dishwashers are
not intended for licensed food establishments. Your dishwasher is NSF
Certifi ed.
Control Lock allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the panel.
To lock and unlock
the buttons on the control panel, hold the
Sanitize
button down for three (3) seconds when power is On.
5
Display
Displays cycle time and remaining hours and minutes,
Delay Start
hours, and
Information codes. If a problem occurs during operation, an information code
appears with a warning sound. Refer to the information codes page.
Control Lock indicator
-
Turns on if the Control Lock is set (or the dishwasher is in the standby
or pause modes).
-
Turns off while the dishwasher is operating.
-
When Control Lock is on, the Control Lock indicator blinks for several
seconds if any button except the
POWER
button is pressed.
Rinse Refi ll indicator
-
Turns on if the dishwasher runs out of rinse aid.
Delay Start indicator
-
Turns on if you set Delay Start (including the time range).
-
Turns off when the set time range of Delay Start has ended.
DW80M3021_DD81-02549A-00_EN.indd 8
DW80M3021_DD81-02549A-00_EN.indd 8
2017-08-02 2:42:42
2017-08-02 2:42:42
