8
Operation
Multi-Stage Cooking
1
Press the
Power Level
button to select power.
By pressing the
Power Level
button repeatedly, you can select the
power level - HI, MED, or LO.
2
Use the
Number
buttons to enter the cooking time. You can set a
time from one second to 30 minutes. To set a time over one minute,
enter the second as well. For example, to set 10 minutes, enter 1,
0, 0, 0.
3
Repeat steps 1 - 2 for stage II or III cooking.
4
Press
Start
button to begin cooking.
Note:
The maximum allowable cooking time is 30 min. The sum
of programmed stage cooking time must not exceed 30
min. If the time exceeds 30 min, the display will show
“E3”. Press the
Stop/Clear
button and retry the steps.
Memory Programming
One-Stage Cooking
1
Upon pressing the
Program
button, the oven will enter the
Program mode. The display will be cleared.
2
Using the
Number
buttons, enter the program number from 1 to
20.
3
Then, press the
Power Level
button to select power. By pressing the
Power Level
button repeatedly, you can select the power level - HI,
MED, or LO.
4
After selecting the power level, Use the
Number
buttons to enter
the cooking time. You can set a time from one second to 30
minutes. To set a time over one minute, enter the seconds as well.
For example, to set 10 minutes, enter 1, 0, 0, 0.
5
Press the
Program
button to complete setting the memory.
The display will show "
:
0
" or the present time (If the time is set)
Note:
The maximum allowable cooking time is 30 min. If the
time exceeds 30 min, the display will show “E3”. Press the
Stop/Clear
button and retry the steps.
Power Level
Percentage
Output
HI
100%
1100W
MED
70%
770W
LO
50%
550W
sanyo.fm Page 8 Thursday, January 6, 2005 5:52 PM
