Connecting the headset
13
Connecting additional mobile devices
The headset can connect to up to two mobile devices at the same time. In this case, the
second mobile device you connect will be recognised as the primary device.
This feature may not be available on some mobile devices.
1
Connect the headset to the first mobile device via Bluetooth. Refer to
for more information.
2
Press and hold the headset’s Multifunction button to enter Bluetooth pairing mode again.
The first mobile device will be disconnected.
3
Connect the headset to the second mobile device in the same way as the first mobile
device.
4
Select the headset from the Bluetooth list on the first mobile device to reconnect it.
Reconnecting or disconnecting the mobile
devices
Reconnecting the mobile devices
If the Bluetooth connection ends due to distance issues between the headset and mobile
device, bring them closer together within a certain period of time to reconnect them
automatically.
If the Bluetooth connection ends due to the connected mobile device, use the Bluetooth
menu on the mobile device.
Disconnecting the mobile devices
Press and hold the headset’s Multifunction button. Then, the Bluetooth connection will end
and the headset will enter Bluetooth pairing mode again.
You can also end the Bluetooth connection when turning off the headset by pressing and
holding the Power button. In this case, the headset will be automatically connected with the
most recently paired mobile device when turning on the headset if it is in range.
Noise may occur if the Bluetooth connection is disconnected improperly.
English (UK)
11
