Using the headset
17
List of voice prompts
Status
Voice prompt*
When you turn the
headset on or off
“Power on” or “Power off”
When you enter
Pairing mode
“Ready to pair. Search for the headset from the Bluetooth menu”
When you turn the
Multi-point feature on
or off
“Multi-point mode is on” or “Multi-point mode is off”
When you connect the
headset to the devices
“Device is connected” or “Two devices are connected”
When you disconnect
the headset from a
device
“Device is disconnected”
When you reject or end
a call
“Call terminated”
Resetting the headset
When the headset is paired with a mobile device, it automatically saves connection and
feature settings, such as the Bluetooth address or device type of the mobile device.
To reset the connection settings saved in the headset, enter Pairing mode, press and hold
both Volume buttons and the Talk button at the same time for 3 seconds. The indicator light
flashes violet three times.
When resetting the headset, all connection settings saved in the headset are deleted,
and the connection with mobile devices are deleted. To use the headset, pair with
mobile devices again.
* Voice prompt content may vary.
